We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Azerbaijan. The private labels and part numbers shown on this website are the property of their respective owners.
Model | SK-1000 | |
Type | DIN rail mounting | |
Main unit/expansion unit | Main unit | |
Display | Display resolution | 0.001 kV |
Display range | ±99.999 kV to 99 kV (4-level selection available) | |
Analogue voltage output | ±5 V, 1 to 5 V, 0 to 5 V, output impedance 100 ?*1 | |
Analogue current output | 4 to 20 mA, maximum load resistance 350 ?*1 | |
Control input | Zero-shift input | Non-voltage input*2 |
Timing input | ||
Reset input | ||
Bank input | ||
Control output | Judgement output | Open collector output (NPN/PNP switching, N.O./N.C. switching)*3 |
Alarm output | Open collector output (NPN/PNP switching, N.C.)*3 | |
Power supply | Power supply voltage | 10 to 30 VDC, including 10% ripple (P-P)*4 |
Power consumption | 1650 mW or below (55 mA or below with 30 V) (excluding load current of each output)*5 | |
Environmental resistance | Ambient temperature | 0 to +50 °C (No freezing or condensation) |
Relative humidity | 10 to 85 % RH (No condensation) | |
Material | Body case and front cover : PC , Key top : POM , Cable : PVC | |
Weight | Approx. 150 g (including accessories) | |
*1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA selected for use. *2 Inputs are assigned to the four external input lines. Non-voltage input rating : ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating : maximum input rating is 30 V, ON voltage 7.5 V or higher, OFF current 0.05 mA or below. *3 NPN open collector output rating : maximum 50 mA/ch (20 mA/ch when expansion units are added) 30 V or below, residual voltage 1 V or below (1.5 V or below when adding 6 or more expansion units, including main unit). PNP open collector output rating : maximum 50 mA/ch (20 mA/ch when expansion units are added) below power supply voltage, residual voltage 2 V or below (2.5 V or below when adding 6 or more expansion units, including main unit). *4 Use 20 to 30 V as power supply voltage when 6 or more expansion units, including main unit, are to be used. *5 When connecting 8 units for DL connection, maximum power is consumption 11.3 W. |