We are not the manufacturer, authorised distributor or authorised representative of the IFM brand Azerbaijan. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
IFM
Country
Germany
Part number
PT5404
Description
Pressure transmitter with excellent repeatability and low linearity error
Stock availability:
On request
Application | |||||
---|---|---|---|---|---|
Application | For general industrial use | ||||
Medium | Liquid or gaseous media | ||||
Measured medium temperature [°C] | -40…90 | ||||
Pressure strength [bar] | 25 | ||||
Note on pressure strength |
| ||||
Min. burst pressure [bar] | 300 | ||||
Vacuum resistance [mbar] | -1000 | ||||
Pressure type | Relative pressure | ||||
Electronic data | |||||
Operating voltage [ V] | 8.5…36 DC | ||||
Min. insulation resistance [M?] | 100, (500 V DC) | ||||
Protection class | III | ||||
Reverse polarity protection | yes | ||||
Inputs/outputs | |||||
Number of inputs and outputs | Number of analog outputs: 1 | ||||
Outputs | |||||
Total number of outputs | 1 | ||||
Output signal | analog signal | ||||
Number of analog outputs | Number of analog outputs | td> | 1 | ||
Analog current output [mA] | 4…20 | ||||
Maximum load [?] | 720, (Ub = 24 V, (Ub - 8.5 V) / 21.5 mA) | ||||
Short circuit protection | yes | ||||
Overcurrent protection | yes | ||||
Measuring/setting range | |||||
Measuring range [bar] | 0…10 | ||||
Accuracy/accuracy | |||||
Repeatability [% of span] | <± 0.05, (at temperature changes <10 K) | ||||
Deviation from characteristic [% range] | <± 0.5, (incl. drift at constriction, zero point error and errors, non-linearity, hysteresis) | ||||
Linearity deviation [% span] | <± 0.1 (BFSL) / <± 0.2 (LS) | ||||
Hysteresis deviation [% of span] | <± 0.2 | ||||
Long-term stability [% of span] | <± 0.1, (over 6 months) | ||||
Temperature coefficient of zero point and span [% from measuring range / 10 K] | <0.1 (-25...90 °C) / <0.2 (-40...-25 °C) | ||||
Response time | |||||
Analogue output transient rise time [ms] | 1 | ||||
Operating conditions | |||||
Ambient temperature [°C] | -40…90 | ||||
Storage temperature [°C] | -40…100 | ||||
Degree of protection | IP 67, IP 69K | ||||
Tests / Approvals | |||||
EMC |
| ||||
Impact resistance |
| ||||
Vibration resistance |
| ||||
MTTF [years] | 686 | ||||
Pressure Equipment Directive | Good engineering practice, can be used for fluid group 2, fluid group 1 on request | ||||
Mechanical data | |||||
Weight [g] | 59 | ||||
Material | 1.4542 (17-4 PH / 630), stainless steel steel (1.4404 / 316L), PEI environment | 1.4542 (17-4 PH / 630) | |||
Min. pressure cycles | 60 million, (at 1.2 x rated pressure) | ||||
Tightening torque [Nm] | 25…35, (recommended tightening torque, depending on lubrication, sealing and pressure rating) | ||||
Process connection | G 1/4 male thread thread (DIN EN ISO 1179-2) | ||||
Process seal | FKM (according to DIN 3869) | ||||
Built-in delimiter | none | ||||
Notes | |||||
Notes |
| ||||
Packing quantity | 1 piece | ||||
electrical connection | |||||
Connection | Connector: 1 x M12 |